You are Here:
Project CBR

Author (Read 163 times)

0 Members and 1 Guest are viewing this topic.

Re: Project CBR
« Reply #15 on: July 29, 2019, 19:16:38 PM »
 

NichB

  • Member
  • **
  • 14
    Posts
    • View Profile
One step forward two steps backwards

One of the pilot jets is stuck fast in the carb, i cleaned it in the ultrasonic bath anyway, stuck it in the freezer, but no luck

NRP do pilot jets for around 5

Before dissasembly i noticed the choke on each carb was very stiff

On reassembly i cant find a spring, i cant remember if it was ever there, i normally assemble these parts dry, but im going to use the smallest amount of light oil on choke piston.

Have a found another complete set of carbs and a complete set of front calipers, master cylinder with braided hoses, a week of negotiation ahead

If i can get these parts together in the next week that would be great, after that we are on holiday in France for three weeks, so no progress on bike

Cheers

Nichb  :thumbs:
 

Re: Project CBR
« Reply #16 on: July 29, 2019, 20:38:52 PM »
 

Bill

  • Senior Member
  • ***
  • 43
    Posts
    • View Profile
Yes Nich , the trials and tribulations of an old bike, but look to the future ,that's when your hard work comes together.Bill
 

Re: Project CBR
« Reply #17 on: July 30, 2019, 12:38:22 PM »
 

xpd153

  • Ultimate Member
  • *****
  • 178
    Posts
    • View Profile
CBR1100XX front brake master cylinder is just black version and same spec.
CBR750 master cylinder has brass color.

My CBR750 has black blackbird master cylinder. Because original one has non translucent level window.


 

Re: Project CBR
« Reply #18 on: July 30, 2019, 14:11:21 PM »
 

NichB

  • Member
  • **
  • 14
    Posts
    • View Profile
Good info thank you

As the fasteners in the master cylinder are seized

Nichb :thumbs: